eChinaTool                                                                                                                                                                                                                                                                                                                                                              www.eChinaTool.com                   

  Home |   About Us  |  Products  |  Shipment  |  How to order  |  Payment Term  |  Send Inquiry   |  After Service  |   Email|         

　

 

BX1 A.C.ARC welding machine
Applications：
　　 A.C.arc welding machine Series BX1 Provide A.C.Power Source for single operator manual arc welding of work pieces of low-Carbon steel and low-alloy steel by using coated electrode.
Structure features:

　　Series BX1 is the A.C.arc welding of movable iron core Adjusting the movable iron core the leakage reactance is different so as to change the welding current.
BX1-130-1
BX1-315-1
BX1-500-1
　
BX1-250
BX1-315
BX1-500
　
BX3 A.C.ARC Welding machine
Applications：

　　 Arc welding transformer series BX3 are used as arc power source for single-operator manual arc welding for low-carbon steel and low-alloy steel and for arc cutting of these metals.
Structure features:

　　Arc Welding transformer series BX3 are single phase A.C arc welders provide with movable secondary coil as the screw turns. The two secondary coil are move along the limbs, A change in leakage reactance take place resulting in a change in the welding current.
BX3-315-2
BX3-500-2
BX3-315-3
BX3-500-3
BX6 A.C.ARC welding machine
Applications：

　　 The welding machine series BX6 as a general purpose manual arc welding power supply suitable for welding of workpieces in medium. small size and in shorter operating time.
Structure features:

　　Welder series BX6's transformer is a leakage one, Different current can be obtained by changing the distribution of the turns of two prts of primary winding on the two iron core.
BX6-125
BX6-200
BX6-300
　
BX6-140
BX6-160
BX6-250
 
WSM Inventor type D.C. pulsed TIG welder
Applications：

　　 Inventor type D.C pulsed TIG welder series WSM is applicable to all ferrous metal, copper and stainless steel.
Structure features:

　　The Inventor Frequency of welder series WSMis as high as 25KHZ,weight and volume are much lighter and smaller than traditional welder. Its welding function and efficiency are much better than traditional welder.
WSM-100
WSM-130
WSM-160
　
WSM-315
WSM-400
WSM-500
　
    RSR
Applications：

　　 Capacitor discharge stud Welder Model RSR is adapted to weld stud or metal rod on the metal plate in varieties of fields such as ship-building, instrument industry, boiler manufacturing and construction engineering etc. Of these, it is very suitable for welding the stud on mild carbon steel plate, thin plate of stainless steel and non-ferrous metals. After welding the welded plate will not be deformed and the backside cooling will not be peeled off either.
Structure features:

　　The capacitor's charge and discharge is controlled by thyristor. It has the advanges of well controlled performance and quick response.
RSR-800
RSR-1600
　
RSR-2600
RSR-4000
　
　
  NBC Stud welding machine
Applications：

　　 Semi-Automatic CO2 arc gas-shielded welder Series NBC are popular multi-usage gas shielded arc welder, which is suitable for gas-shielded welding of ferrous metals such as mild steel, low alloy steel and low alloy high strength steel etc.
Structure features:

　　NBC-200，NBC-300，NBC-450have simple structure for utilization of tapped silicon rectifier welding source.
　　NBC-250，NBC-350，NBC-500 is thyristor controlled welding source.It has the advange of well controlled performance, smooth speed regulation of wire feed with the help of thyristor and reliabe welding quality.
NBC-200
NBC-200
　
NB-200
NB-500
ZXE1、ZX5、ZX7、ZXG Rectifying arc welder
Applications：

　　The manual rectifying electric arc welders widely used for stainless steel low or middle corbonous steel and low alloy steel with any kinds of welding-rod.
Structure features:

　　Welder series ZX5 is thyristor controlled DC arc welder.Rectifier and transformer are cooled with fan directly. It has the advanges of light weigh, quick response, wide range of current adjustment.
　　Welder series ZXGis equiped with three phase magnetic amplifier circuit has the advanges of simple maintenance reliable operation high efficiency and long service life.
 
ZXE1-250
ZXG-300
ZXG-500
　
ZXE5-250
ZX5-630
ZX7-315
LGK、DNJ Air plasma cutting machine Manual spot welder
Applications：
　　 The LGK air plasma cutting machine is used for cutting stainless steel alloy steel carbon steel and such metal materials as aluminum alloy and copper.     Mobile manual spot welder series DNJ is suitable for welding of mild steel, stainless steel and zinc-plated iron. Adding some solder, it can be used for welding of ferrous metal, Nonferrous metal and rare metal suck as alloy copper, gold, silver, etc. It can satisfy the customers widely.
Structure features:
　　The cutting machine features a compact package of controlled and power source. The main transformer is magnetic flux leakage type. The cutting machine is cooled by forced air.
        DNJ series is equipped with 2 meters outside cables and manual spot torch or holder, operate flexibly and move conveniently.
　　DNJ series is equipped with rectifier switch Circuit, It Can be shut off quickly and welding time Can be adjusted and controlled conveniently.
DNJ-5
DNJ-16
DNJ-25
　
LGK-40
LGK-63
LGK-100
　
Applications：
　
　　 The submerged arc welder series MZ is intened for automatic submerged arc welding of butt joints with or without groove lap joints and fillet joins. This welder with large capacity is specially used to weld heavy steel structures in boiler, shipbuilding and machinery of chemical industry.
MZ-1000
MZ-1250
　
DNDN-16 Pedal Time Operating Spot Welder,
UN1 DN-16 UN1-100 Welder
Applications：
　　The type of DN-16 Pedal Time Operating Spot Welder can be used to weld the material of carbon steel, medium & low carbon alloy steel and stainless steel within the given thick of welding. The welder's rigidity is very strong, for using the structure of integrative steel plate; the digital time relay warrants the accurate welding time, error<0.1s, it has the specialist result for welding the steel sheet.
        The type of UN-100 welder is belong th the lever pressing spot welding machine. Its rated power is 100KV.A. It can weld all kinds of lath, sticktail or tubular of low carbon steel, medium carbon steel, some alloy and nonferrous metal (copper, aluminum and their alloy). It can adopt the resistance welding or flash welding.
　　
 
DN-16
DN-25
　
DN1-100

    eChinaTool    Reserved