eChinaTool                                                                                                                                                                                                                                                                                                                                                              www.eChinaTool.com                   

  Home |   About Us  Products  |  Shipment How to order  |  Payment Term  Send Inquiry   |  After Service  |   Email|         
Model ZAY7032 Milling & Drilling Machine  

        Milling, drilling, tapping boring, reaming.
  Head swivels 360 centigrade.
  Wide and big table
  Fine down feed calibrated
  Heavy-duty tapped roller bearing spindle.
  Positive spindle lock
  Adjustable gibs on table
  Adjustable stops on table

Model ZAY7032 STANDARD ACCESSORIES
Drill capacity 32mm 1.draw bar
End mill capacity 20mm 2.tie rod washer
Face mil capacity 76mm 3.socket wrench MAG24
Swing 405mm 4.screw driver 6″
Swivel angle of headstock (horizontal) 360mm 5.drill stock
Spindle taper MT3.R8 6.wedge
Max distance between spindle
nose to table
470mm 7.allen wrenched 5mm,6mm
Max distance between spindle
axis to column surface
193.5mm OPTIONAL ACCESSORIES
Spindle travel 130mm 1.machine stand
Diameter of spindle sleeve 75mm  
Steps of speed 12 2.mill cutter holder
Range of speeds(50HZ) 100-2080rpm 3.drill chuck
Range of speeds(60HZ) 120-2500rpm  
Table size 800〜240mm/
700〜240mm
 
Forward and backward travel of table 175mm  
Lift and right travel of table 500mm,400mm  
Diameter of column 115mm  
Power 1.5kw  
Voltage. frequency  As customer's requirement  
Net/gross weight 265kg/300kg  
Overall height (without stand) 1060mm,1300mm  
Machine stand height 510mm  
Length 1080mm  
Width 1160mm,1060mm  

Model ZAY7032G Milling & Drilling Machine

  Milling, drilling, tapping boring, reaming.
  Head swivels 360 centigrade
  Wide and big table
  Fine down feed calibrated
  Heavy-duty tapping roller bearing spindle.
  Positive spindle lock
  Adjustable gibs on table
  Adjustable stops on table

Model ZAY7032G STANDARD ACCESSORIES
Drill capacity 32mm 1.draw bar
End mill capacity 20mm 2.tie rod washer
Face mill capacity 76mm 3.socket wrench MAG24
Swing 680mm 4.screw driver 6"
Swivel angle of headstock
(horizontal)
360 centigrade 5.drill stock
Swivel angle of headstock
(perpendicular)
90 centigrade 6.wedge
Spindle taper M.T3.R8 7.allen wrenches 5mm, 6mm
Max distance between spindle
nose to table
450mm  
Max distance between spindle
axis to column surface
272.5mm OPTIONAL ACCESSORIES
Spindle travel 130mm 1. machine stand
Diameter of spindle sleeve 75mm  
Steps of speed 6 2.mill cutter holder
Range of speeds(50HZ) 50-1250 rpm 3.drill chuck
Range of speeds(60HZ) 60-1500 rpm 4.machine stand
Table size 800〜240mm/700〜240mm  
Forward and backward travel
of table
175mm  
Lift and right travel of table 500mm, 400mm  
Diameter of column 115mm  
Power 0.75kw  
Voltage/frequency As customer's requirement  
Packing size    
Net/gross weight 295kg/340kg  
Overall height (without stand) 1060mm  
Machine stand height 510mm  
Length 820mm  
Width 1160mm, 1060mm  

eChinaTool    Reserved