Home |   About Us   |  Products   |  Shipment How to Order  |  Payment Term  Send Inquiry   |  After Service  |   Email |         

 Precision ground and supersonic frequency hardened bed ways
The spindle is supported with precision roller bearings
Head stock gears are made of high quality steel, ground and hardened
Spindle speed range:70-2000RPM
Sealed and easy operating feed box has various feeds and threads cutting functions
Max.swing over bed 13" (330mm)
Max.swing in gap 183/4" (476mm)
Max.swing over slide 7/4" (185mm)
Bed width 73/8 (187mm)
Max.length of workpiece 30"(750mm) 40" (1000mm)
Spindle nose D1-4
Spindle bore 11/2" (Ø38mm)
Taper of bore in spindle morse No.5
Spindle speed step 8
Spindle speed scope 70-2000r/min
Inch thread 4-56T.P1/32
Metric thread 0.4-7mm/32
Diametric thread 8-120D.P/33
Modular thread 0.2-3.5MP/27
Longitudinal feed range 0.0032-0.1067in/r(0.082-2.71mm/r)
Cross feed range 0.00086-0.0367in/r(0.022-0.933mm/r) of tailstock quill 35/8"(95mm)
Taper hole of tails stock No.3
Electric motor 2HP(1.5KW) 110V or 220V(1ph)
           220V or 380V(3ph)
Net weight :Gross weight/(1000mm) 495/595kg

Hardened and ground bed ways
  16 speeds all geared headstock
  3HP(2.4KW)three phase motor
  Foot brake giving rapid braking
  Emergency stop button equipped on the front of headstock
  Jog button for easy gear
engagement and inching spindle
  Open type chip pan easily to remove chips
Extra safety switch shuts down machine entirely for changing belt or gear for   threading cutting

Max.swing over bed mm Ø356(14")
Swing over carriage mm Ø220(8-5/8")
Max.swing in gap mm Ø506(20")
Width of bed mm 206(8-1/8")
Distance between centers mm 1000/750(40"/30")
Taper of spindle bore mm M.T.No.5
Diameter of spindle thru hole mm Ø38(1-1/2")
Number of spindle speeds 16,2Ranges
Range of spindle speeds 45-1800RPM
Spindle nose D1-4
Metric pitch threads 0.45-7.5(22kinds)
Whit-worth threads mm 4-112(44kinds)
Range of longitudinal feeds 0.043-0.653(0.0012"-0.0294"rev)
Range of cross feeds mm 0.015-0.220(0.0003"-0.01"rev)
Diameter of leadscrew mm Ø22(7/8")
Pitch threads of leadscrew mm 4(8T.P.I)
travel of tailstock quill mm 120(4-3/4")
Diameter of tailstock quill mm Ø45(1-25/32")
Taper hole of tailstock quill mm M.T.No.3
Main motor power 1.5/2.4(3HP)
Coolant pump motor power kw 0.04(0.055HP)
Overall dimentions of lathe(LxWxH)mm 2020x900x1560 
Packing size of lathe(LxWxH)mm 1920x740x1180 
Net weight kg 750(1650 lbs)
Gross weight kg 880(1950 lbs)
    China Rui Feng Corp., Ltd.
        TEL: +86-532-85819106 82971386            FAX: +86-532- 85829250  82971397

              Add: 32/F, International Trade Mansion, No.51, TaiPing road, QingDao, China 266001      


                                                 Copyright © 2001 - 2002 SDCLF All Rights Reserved