eChinaTool                                                                                                                                                                                                                                                                                                                                                              www.eChinaTool.com            

  Home |   About Us  Products  |  Shipment How to order  |  Payment Term  Send Inquiry   |  After Service  |   Email|  
Digital Caliper With Carbide Tipped Measuring Faces

Manual power on/off
Metric/Inch system interchange at any position
Zero setting at any position
With data output interface.
With carbide tipped measuring faces.
No.

Range  mm/in

Resolution  mm/in
111-251 150/6 0.01/.0005
111-252 200/8 0.01/.0005
111-253 300/12 0.01/.0005
New Mode Digital Caliper

 


 


Manual power on/off
Metric/Inch system  interchange
Zero Setting at any position
With data output interface
Open slider or mono-block slider for choice
No.

Range  mm/in

Resolution  mm/in
111-075D 75/3 0.01/.0005
111-100D 100/4 0.01/.0005
111-101D 150/6 0.01/.0005
111-102D 200/8 0.01/.0005
111-103D 300/12 0.01/.0005

"MODE" Digital Calipers
Manual power on/off  Zero setting at any position
Metric/Inch system interchange at any position
Data hold function
Fast tracing of minimum value or maximum value during measurements  With data output interface

 

No.

Range  mm/in

Resolution  mm/in
111-101F 150/6 0.01/.0005
111-102F 200/8 0.01/.0005
111-103F 300/12 0.01/.0005
     
"HOLD" Digital Calipers
Data hold function
No.

Range  mm/in

Resolution  mm/in
111-101H 150/6 0.01/.0005
111-102H 200/8 0.01/.0005
111-103H 300/12 0.01/.0005
"TOL" Digital Calipers
May be used to determine if the measured item's dimension is in the predetermined range in caliper.
No.

Range  mm/in

Resolution  mm/in
111-101T 150/6 0.01/.0005
111-102T 200/8 0.01/.0005
111-103T 300/12 0.01/.0005
"ABS" Digital Calipers
Absolute measurement and relative measurement interchange at any position
No.

Range  mm/in

Resolution  mm/in
111-101E 150/6 0.01/.0005
111-102E 200/8 0.01/.0005
111-103E 300/12 0.01/.0005
Vernier-digital Caliper

Manual power on/off  
Metric/Inch system interchange at any position.
With data output interface
Vernier Caliper and Digital Caliper combined
Four-way measurement

 
No.

Range mm/in

Resolution mm/in Vernier mm

101-101

150/6 0.01/.0005 0.05
101-102 200/8 0.01/.0005 0.05
101-103 300/12 0.01/.0005 0.05
    China Rui Feng Corp., Ltd.
        TEL: +86-532-5819106 2971386            FAX: +86-532- 5829250      2971397
   Email: sales@echinatool.com          support@echinatool.com

              Add: 32/F, International Trade Mansion, No.51, TaiPing road, QingDao, China 266001      

 

                                                 Copyright © 2001 - 2002 SDCLF All Rights Reserved