eChinaTool                                                                                                                                                                                                                                                                                                                                                              www.eChinaTool.com            

  Home |   About Us  Products  |  Shipment  How to order  |  Payment Term  Send Inquiry   |  After Service  |   Email|  
Long Jaw Inside Digital Caliper

กก

กก

 

With long jaws, it's easy to obtain the diameter of deep hole.

No.

Range mm/in Resolution
 mm/in
Jaw
113-101 15-150/6 0.01/.0005 60
113-101-1 20-150/6 0.01/.0005 90
113-101-2 25-150/6 0.01/.0005 150
113-102 18-200/8 0.01/.0005 75
113-102-1 22-200/8 0.01/.0005 100
113-102-2 25-200/8 0.01/.0005 150
113-103 20-300/12 0.01/.0005 90
113-103-1 22-300/12 0.01/.0005 120
113-103-2 25-300/12 0.01/.0005 150
113-105 22-500/20 0.01/.0005 120
113-105-1 25-500/20 0.01/.0005 150
113-105-2 35-500/20 0.01/.0005 200
กก
Tube Digital Caliper
To measure the tube wall thickness if the tube's  internal diameter is 4mm or more.

No.

Range mm/in Resolution
 mm/in
Jaw
116-101 150/6 0.01/.0005 30
116-102 200/8 0.01/.0005 40
116-103 300/12 0.01/.0005 50

Center Distance Digital Caliper

Manual power on/off
Metric/Inch system interchange at any position
Zero setting at any position
With data output interface
Center distance of two holes can be easy obtained directly by moving the slider
Distance between hole and plane can be obtained too 
To measure holes with diameters bigger than Ø5mm,awl anvil bigger than Ø5mm is necessary, which is purchased separately

NO. Range mm/in Resolution mm/in
119-111 5-150/6 0.01/.0005
119-112 5-200/8 0.01/.0005
119-113 5-300/12 0.01/.0005



Digital Thickness Caliper
Manual power on/off
Metric/Inch system interchange at any position
Zero setting at any position
With data output interface
To measure the thickness of metal sheet
NO. Range mm/in Resolution mm/in
112-181 50/2 0.01/.0005
112-182 80/3.2 0.01/.0005

Plate Anvil Digital Caliper
 

Manual power on/off
Metric/Inch system interchange at any position
Zero setting at any position
With data output interface
To measure the half-soft board (foamed plastic, sponge, plank)

No.

Range mm/in

Resolution mm/in
112-141 150/6 0.01/.0005
112-142 200/8 0.01/.0005
112-143 300/12 0.01/.0005

    China Rui Feng Corp., Ltd.
        TEL: +86-532-5819106 2971386            FAX: +86-532- 5829250      2971397
   Email: sales@echinatool.com          support@echinatool.com

              Add: 32/F, International Trade Mansion, No.51, TaiPing road, QingDao, China 266001      

 

                                                 Copyright © 2001 - 2002 SDCLF All Rights Reserved