eChinaTool                                                                                                                                                                                                                                                                                                                                                              www.eChinaTool.com             

 Home |   About Us   |  Products   |  Shipment How to Order  |  Payment Term  Send Inquiry   |  After Service  |   Email |         
Bench Lathe C0632A C0636A
MODELS
C0636A750
C0632A1000
C0636A750
C0636A1000
Swing over bed 330mm(13") 360mm(14")
Swing over cross slide 198mm(7-25/32") 212mm(8-1/6")
Swing in gap diameter 476mm(18-3/4") 491mm(9-1/3")
Swing in length 210mm(8-1/4") 210mm(8-1/4")
Center height 166mm(6-1/2") 166mm(6-1/2")
Admits between 750mm(30") 1000mm(40") 750mm(30") 1000mm(40")
Bed width 187mm(7-3/8") 187mm(7-3/8")
Bed length 1248mm(49-1/8") 1655mm(65-1/8") 1363mm(53-2/3") 1655mm(65-1/8")
Spindle bore 38mm(1-1/2") 38mm(1-1/2")
Spindle nose D1-4" or A2-4" D1-4" or A2-4"
Taper in nose NO.5 morse NO.5 morse
Taper in sleeve NO.3 morse NO.3 morse
Speeds number 8 or 16(pole changeable motor) (optional) 8 or 16(pole changeable motor) (optional)
Speeds range 70-2000r.p.m.or 35-2000r.p.m.
(2 speed motor)
70-2000r.p.m.or 35-2000r.p.m.
(2 speed motor)
Cross slide travel 160mm(6-5/16") 118mm(4-5/16")
Compound rest travel 68mm(2-11/16") 68mm(2-11/16")
Lead screw thread 8T.P.I. or 3mm pitch 8T.P.I. or 3mm pitch
Feed rod diameter 19mm(3/4") 19mm(3/4")
Cutting tool max section 16mm16mm(5/8"5/8") 16mm16mm(5/8"5/8")
Threads imperial pitches 36 Nos.8-112 T.P.I. or
(34 Nos.4-56T.P.I)
36 Nos.8-112 T.P.I. or
(34 Nos.4-56T.P.I)
Threads metric pitches 28 Nos.0.2-5mm pitch or (26 Nos.0.4-7mm pitch) 28 Nos.0.2-5mm pitch or (26 Nos.0.4-7mm pitch)
Threads diametral pitches 36 Nos.8-112 D.P 36 Nos.8-112 D.P
Threads module pitches 22 Nos.0.2-3 M.P. 22 Nos.0.2-3 M.P.
Longitudinal feeds imperial 36 Nos.0.0019-0.0273"/Rev.or
(32 Nos.0.002-0.548"/Rev)
36 Nos.0.0019-0.0273"/Rev.or
(32 Nos.0.002-0.548"/Rev)
Longitudinal feeds metric 36 Nos.0.050-0.696"/Rev.or
(32 Nos.0.052-0.392mm/Rev)
36 Nos.0.050-0.696"/Rev.or
(32 Nos.0.052-0.392mm/Rev)
Cross feeds imperial 36 Nos.0.0006-0.0094"/Rev.or
(32 Nos.0.007-0.0187"/Rev)
36 Nos.0.0006-0.0094"/Rev.or
(32 Nos.0.007-0.0187"/Rev)
Cross feeds metric 36 Nos.0.013-0.188"/Rev.or
(32 Nos.0.014-0.380mm/Rev)
36 Nos.0.013-0.188"/Rev.or
(32 Nos.0.014-0.380mm/Rev)
Quill diameter 32mm(1-1/4")(NO.3M.T.)  32mm(1-1/4")(NO.3M.T.) 
or (optional)
Quill travel  100mm(3-15/16")(NO.3M.T.)  100mm(3-15/16")(NO.3M.T.)
or (optional)
Quill taper  NO.3 morse  NO.3 morse
For main motor 1.5KW 3PH or 1PH 1.5KW 3PH or 1PH
    China Rui Feng Corp., Ltd.
        TEL: +86-532-85819106 82971386            FAX: +86-532- 85829250  82971397
   Email: sales@echinatool.com          support@echinatool.com

              Add: 32/F, International Trade Mansion, No.51, TaiPing road, QingDao, China 266001      

 

                                                 Copyright © 2001 - 2002 SDCLF All Rights Reserved