eChinaTool                                                                                                                                                                                                                                                                                                                                                              www.eChinaTool.com                   

  Home |   About Us  |  Products  |  Shipment  |  How to order  |  Payment Term  |  Send Inquiry   |  After Service  |   Email|         
 

JB04 SERIES BENCH PRESS                                    

8.gif (18433 字节)
  1. Manufacturing power presses
  2. Manual presses
  3. Standardized punching die-sets
  4. Stamping machines accessories

 JB04 ,JD04series bench press is designed for industries of timepieces instruments, electronics, cameras, festival lamps, ornaments, terminals, toys, hardware, clothing, caps and footwear. It is suitable for sheets, strips, and rolls by shearing, punching, blanking, bending, riveting, shallow drawing and forming, etc.

Type

Nominal pressure

Slide stroke

Nominal pressure stroke

Strokes per minute

Max.Shut height

Distance between uprights

Depth of throat

Diameter of stem hole

Work table size
(LtoR)*(FtoB)

Slide bottom face dimensions
(LtoR)*(FtoB)

Motor power

Overall Dimensions (L*W*H)

Weight
(kn) (mm) (mm) (s.p.m) (mm) (mm) (mm) (mm) (mm) (mm) (w) (mm) (kg)

JB04-0.5

5

26

1.56

260

115

100

51

φ16*40

252*252

50*42

250

460*302*462

66

JB04-1

10

40

2.40

250

150

106

58

φ20*45

270*270

54*48

370

480*320*540

89

JB04-2

20

40

2.40

220

160

120

65

φ20*48

325*300

65*56

370

530*420*615

150
JD04-0.25 SERIES BENCH PRESS
a2.jpg (15487 字节)

TYPE

 JD04-0.25
nominal pressure  (KN) 2.5
stroke of slide  (mm) 26
strokes per minute  (s.p.m) 220
max.shut height  (mm) 190
shut height adjustment  (mm) 7
dimensions of stem hole  (mm) Ø12X25
depth of throat  (mm) 70
bed dimensions  (mm) 140x130
motor power  (w) AC 220   120W
overall dimensions 265X216X440
weight  (kg) 20
Cold punching die-sets

The die-sets have complete types and specifications, that is classified sliding guide bushings and rolling guide bushings, which

conform, to the National Standard (GB), the trade standard and the enterprise standard. The special specifications can also be

designed and produced on user’s requirements. 

　
a4.jpg (24412 字节) ① ball rear pillars die set
② center guide pillars  die set
③ rear guide pillars die set
④ self-standing guiding elements
⑤ ball rear pillars die set
⑥ center guide pillars  die set
⑦ diagonal guide pillars die set
⑧ rear guide pillars die set
JM-BB rear guide pillars die-sets
type female die circumference closing height holder thickness space of guide pillars
1 60X60 130-150 25 30 51
2 80X80 140-165 30 35 71
3-I 80X100 140-165 30 35 71
3 100X80 150-180 30 35 91
4 100X100 150-180 35 40 91
5 100X125 150-180 35 40 91
6 100X150 150-180 35 40 91
7 125X80 150-180 35 40 113
8 125X100 150-180 35 40 113
9 125X125 150-180 35 40 113
10 150X100 150-180 35 40 145
11 150X125 150-180 35 40 145
12 150X150 160-195 35 45 145
12-Ⅰ 150X180 160-195 35 45 145
12-Ⅳ 150X300 190-235 45 45 145
13 180X125 160-195 35 45 165
14 180X150 160-195 35 45 165
15 180X180 160-195 35 45 165
16 210X100 160-195 35 45 198
17 210X125 160-195 35 45 198
18-Ⅰ 210X100 160-195 35 45 198
19 210X210 170-210 40 50 198
20 250X125 170-210 40 50 235
21 250X150 170-210 40 50 235
22 250X180 170-210 40 50 235
22-Ⅰ 250X210 170-210 40 50 235
23 250X250 190-235 45 55 235
24-Ⅰ 300X125 190-235 45 55 285
24 300X125 190-235 45 55 285
25 300X180 190-235 45 55 285
26-Ⅰ 300X210 200-250 50 60 287
26 300X250 200-250 50 60 287
31 300X300 200-250 50 60 287
32 350X180 200-250 50 60 337
32-Ⅰ 350X210 200-250 50 60 337
33 350X250 200-250 50 60 337
34 350X350 200-250 50 60 337
a3.jpg (12474 字节)   guide pillars

  eChinaTool    Reserved