eChinaTool                                                                                                                                                                                                                                                                                                                                                              www.eChinaTool.com                  

  Home |   About Us  |  Products  |  Shipment  |  How to order  |  Payment Term  |  Send Inquiry   |  After Service  |   Email |         

SERIES JSN REVERSIBLE TAPPING CHUCK
¡ñWith torque safety device
¡ñAdjustable torque
¡ñWith reversible device
¡ñWith Morse connective bar
¡¡¡¡Model JXMS-50,Model JXT18-50 and Model JXT25-50A milling chuck deviated from Model JXT25-50,is designed to meet the user's requirement for specialize productions in which lower frequency of fools exchange is applied.
Model Capacity
¡¡		 MS.NO
JSN7 M2-M7 MS1 MS3
JSN12 M5-M12 MS3 MS4
JSN20 M8-M20 MS3 MS4

MORSE DRILL CHUCK CONNECTIVE BAR

¡¡
Specification
Model d1 d2 L I1 T
MS1-JT6 12.065 17.170 99.5 34 5.2
MS2-JT3 17.780 20.599 119.5 39.5 6.3
MS2-JT6 17.780 17.170 114 34 6.3
MS3-JT6 23.825 17.170 133 34 7.9
MS4-JT6 31.267 17.170 158 34 11.9
MS2-B16 17.780 15.733 112.5 32.5 6.3
MS3-B16 23.825 15.733 131.5 32.5 7.9
MS4-B16 31.267 15.733 156.5 32.5 11.9
MS4-B22 31.267 21.793 173 49 11.9
 

DRILL CHUCK CONNECTIVE BAR

Specification
Model D d2 d3 L I1 T
R8-JT6 R8 17.170 24.10 140.4 30.4 7/16¡±
£¨INCH£©
R8-JT3 R8 20.599 24.10 146 36
R8-B16 R8 15.733 24.10 142.5 32.5

XT DRILL CHUCK CONNECTIVE BAR
Model&Specification D d1 L I1 I2 T
XT30-B16 49 31.75 115.4 68.4 23 M12¡Á1.75
XT40-B16 63 44.46 142.4 93.4 25 M16¡Á2.0
XT50-B16 97.5 69.85 177.4 126.8 26.6 M24¡Á3.0
XT30-JT3 49 31.75 122.4 68.4 23 1/2¡±£¨INCH£©
M12¡Á1.75
XT30-JT6 49 31.75 116.8 68.4 23
XT40-JT3 63 44.45 149.4 93.4 25 1/2¡±£¨INCH£©
M12¡Á1.75
XT40-JT6 63 44.45 143.8 93.4 25
XT50-JT3 97.5 69.85 184.4 126.8 26.6 1¡±£¨INCH£©
M24¡Á3.0
XT50-JT6 97.5 69.85 178.8 126.8 26.6

THREAD DRILL CHUCK CONNECTIVE BAR
Specification
Model Morse taper angle d1 Connecting whorl T d2 I2 I1 L
MS3-M20 23.825 M20¡Á2.5 25H6 99 25 131
MS4-M20 31.267 M20¡Á2.5 25H6 124 25 155
MS5-M20 44.399 M20¡Á2.5 25H6 156 25 186
FULL BACK SPRING CHUCK ARBOR
FLATTING CUTTER HOLDER
¡¡¡¡With strong clamping force and large clamping span, the product is an instrument with wide uses. It can be used to hold all kinds of tools of all sizes with straight hilts, and suitable for numerical control machine tools and those of machining centers.
Model Type
¡¡		 D d L I L1 L2 M
30 -XP6-60 I 25 6 60 36 18 ¡¡ M6
-XP8-60 28 8 M8
-XP10-60 35 10 40 20 M10
-XP12-60 42 12 45 22.5 M12
-XP16-90 48 16 48 24 M14
-XP20-90 52 20 90 50 25 M16
40 -XP8-75 I 28 8 75 36 18 ¡ª M8
-XP10-75 35 10 40 20
-XP12-75 42 12 45 22.5 M10
-XP6-75 48 16 60 24
-XP20-75 52 20 25 M12
-XP25-75 II 65 25 65 24 25
-XP32-80 72 32 80 28
50 -XP8-105 ¡¡¡¡ 28 8 105 36 18 ¡ª M8
-XP8-165 165
-XP8-225 225
-XP10-105 35 10 105 40 20 M10
-XP10-165 165
-XP10-225 225
-XP12-105 42 12 105 45 22.5 M12
-XP12-165 165
-XP12-225 225
-XP16-105 48 16 105 60 21 M12
-XP16-165 165
-XP16-225 225
-XP20-105 52 20 105 60 23 M16
-XP20-165 165
-XP20-225 225
-XP25-105 ¡¡ 65 25 105 89 24 25 M16
-XP25-165 165
-XP25-225 225
-XP32-105 72 32 105 94 24 28 M20
-XP32-165 165
-XP32-225 225
-XP40-120 90 40 120 109 30 32
-XP40-180 180
-XP40-240 240
-XP42-120 42 120
-XP42-180 180
-XP42-240 240

TAP CHUCK ARBOR

¡¡¡¡Suitable for the tap range of M3-M24 for machine tools of automatic numerical control in the machining center, the tap chuck consists of the arbor and tap jacket, and has the function of protection when cutting moment of torque overloads and the function of screw pitch compensation.
Model & Specification Capacity d D L F1 F2 Tap adapter
30 -G12-110 M3-M12 19 46 110 5 15 GT12
-G24-140 M12-M24 30 66 140 10 20 GT24
40 -G12-100 M3-M12 19 46 100 5 15 GT12
-G24-130 M12-M24 30 66 130 10 20 GT24
50 -G12-135 M3-M12 19 46 135 5 15 GT12
-G24-145 M12-M24 30 66 145 10 20 GT24
-G42-190 M24-M42 45 92 190 15 25 GT42

TAP COLLECT
MODE M d D D1 L W
GT12 -3 M3 3.15 38 19 33.7 2.5
-4 M4 4 3.15
-5 M5 5 4.0
-6 M6 6.3 5.0
-8 M8 6.3 5.0
-10 M10 8 6.3
-12 M12 9 7.1
GT24 -12 M12 9 58 30 51.7 7.1
-14 M14 11.2 9.0
-16 M16 12.5 10.0
-18 M18 14 11.2
-20 M20 14 11.2
-22 M22 16 12.5
-24 M24 18 14.0
GT42 -24 M24 18 85 45 95.4 14.05
-27 M27 20 16.05
-30 M30 20 16.05
-33 M33 22.4 18.05
-36 M36 25 20.05
-39 M39 28 22.45
-42 M42 28 22.45

SPRING CHUCK ARBOR

¡¡¡¡The arbor of this type is characterized with high precision, and strong clamping force. The clamping diameters are 4-16,and 6-26.The double-taper spring jacket can clamp tools of straight hilts of various types that are to be used in milling, reaming and cutting, and is suitable for numerical control machine tools and those at the machining center.
Specification
Model D1 d L Clamping range (aperture)
JT.BT.CAT30-ER32-70 32 50 70 4.5.6.8.10.12.14.16
JT.BT.CAT30-ER32-70 32 50 70.100.135.150 4.5.6.8.10.12.14.16
JT.BT.CAT30-ER40-80 40 63 80.100.150 6.7.8.10.12.13.15.16.17.19.20.25.26
JT.BT.CAT30-ER32-80 32 50 80.150.160.200 4.5.6.8.10.12.14.16
JT.BT.CAT30-ER40-120 40 63 80.120.160.200 6.7.8.10.12.13.15.16.17.19.20.25.26
DRILL CHUCK ARBOR
MORSE HOLE ARBOR WITHOUT FLAT END
¡¡¡¡The arbor is suitable for numerical control machine tools and those at the machining center, and it can be used with the Morse cone arbor cutters without flat end in milling, reaming and cutting.
Model Type MT.NO L D d d1 M
30 -MW1-45 I 1 45 25 12.065 10 M6
-MW2-25 II 2 25 32 17.780 ¡ª M10
-MW3-80 3 80 40 23.825 M12
40 -MW1-45 I 1 45 25 12.065 10 M6
-MW2-60 2 60 32 17.78 13.5 M10
-MW3-60 II 3 40 23.825 ¡ª M12
-MW4-85 4 85 50 31.287 M16
50 -MW1-45 I 1 45 25 12.065 10 M6
-MW2-45 2 32 17.78 16 M10
-MW3-60 3 60 40 23.825 18 M12
-MW4-75 4 75 50 31.267 20.5 M16
-MW5-100 II 5 100 60 44.399 ¡ª M20

MORSE HOLE ARBOR WITH FLAT END
¡¡¡¡The arbor is suitable for numerical control machine tools and those at the machining center, and it can be used with the Morse cone arbor cutters with flat end in milling, reaming and cutting.
Model Type MT. NO D d L
30 -M1-45 I 1 25 12.065 45
-M1-105 II 105
-M2-60 I 2 32 17.780 60
-M2-120 II 120
-M3-80 I 3 40 23.825 80
40 -M1-45 I 1 25 12.065 45
-M1-120 II 120
-M2-60 I 2 32 17.78 60
-M2-120 II 120
-M3-75 I 3 40 23.825 75
-M3-135 II 135
-M4-95 I 4 50 31.267 95
-M4-165 II 165
50 -M1-45 I 1 25 12.065 45
-M1-120 II 120
-M1-180 180
-M2-45 I 2 32 17.78 45
-M2-135 II 135
-M2-180 180
-M3-45 I 3 40 23.825 45
-M3-150 II 150
-M3-180 180
-M4-75 I 4 50 31.267 75
-M4-180 II 180
-M5-105 I 5 65 44.399 105
-M5-210 II 210

eChinaTool    Reserved

¡¡