eChinaTool                                                                                                                                                                                                                                                                                                                                                              www.eChinaTool.com            

  Home |   About Us  Products  |  Shipment How to order  |  Payment Term  Send Inquiry   |  After Service  |   Email|  
MODEL: 5050A
PURPOSE:
  This vertical planning machine is suitable for vertical planning active surfaces of parts and notch etc.
CHARACTERISTICS:
  The machine runs smoothly owing to it adopts double crank mechanism. The machine operates easily because motion of the working table is driven by electric motor.
Max.Slotting Length of ram 500mm
Max.diameter of worktable 1000mm
Cross traverse of worktable 660mm
Longitudinal traverse of worktable 1000mm
Max.weight of workpiece 2000kg
Distance between tool holding surface and column front 1000mm
Range of ram adjustment 430mm
Distance between worktable and the lower side of slide 740mm
Inclination of ram head (left&right directions) +10 to -10
Number of ram strokes
(per min.)
9,12,15,18,25,36,50
Longitudinal and cross feeds of worktable (mm. per ram strokes) 0.1,0.2,0.3,0.4
0.6,1.2
Rotary feeds of worktable
(min per ram stroke)
3.6.9.12.18.36
Max. cutting force 1600kg/16000N
Rapid traverse motor 1.5kw1410rpm
Main motor 7.5kw1440rpm
coolant pump motor 0.125kw2800rpm
net weight of machine (approx.) 10 tons
Overall dimensions 3480*2085*3307mm

 
MODEL: SLOTTING MACHINE B5032D
PURPOSE:
  This machine tool is used to process planes, model surfaces, key seating etc.. and it is suitable for the single-piece or small-batch production workshop.
CHARACTERISTICS:
  The main transmission mechanism is to transmit the throw over motion of the rock er arm into the to -and -fro motion of the ram The operating platform can move vertically and horizontally and revolve it is able to achieve automatic feed and hand operating feed Also it can move fast in case of breakdown. the platform will automatically stop feeding and achieve limit safely.
  When the machine tool is started stop using electromagnetic clutch so as to achieve concentration operation of the machine tool.
  Indexing mechanism is used for the graduation of the throw-over motion of the operation platform parts are processed according to the desired graduation.
  This machine is carefully designed and it is characteristic of standardization. generalization. serialization. high degree automation . Also it is of reasonable distribution .compact structure ,well-balanced proportion .good outer looks and convenient maintenance.
  The lubrication of the machine tool is brought about by the oil pump. and lubrication oil is transmitted to various points by the oil-transmitting tubes with convenient adjustment.
  The electric equipment of the machine tool is fixed in the bed at the back part of the lower bed it is safe and reliable because there are concentrated push buttons in the upper bed.
  As for other power source conditions raised by the customer. special orders of goods supply can be effected through negotiation.
Max Slotting length 320mm
Max dimensions of workpiece(LxH) 600*320mm
Max weight of workpiece 500kg
Max cutting force 750kg
Effective stroke of ram 50~340mm
No of ram strokes per minute 20 32 50 80rpm
Vertical adjustment of ram 315mm
Inclination of ram 0~8
Distance between tool holding surface and column front 600mm
Max tool shank size(WxH) 25*40mm
Table diameter 630mm
Distance between table surface and low end of ram 490mm
Max longitudinal travel of table 630mm
Max cross travel of table 560mm
Max rotary angle of table \360
Range of table Longitudinal and cross power feeds 0.08-1.21
Range of table power feeds 0.52-0.783
Power of main drive motor 4kw
Rotating speed of main drive motor 960rpm
Power of rapid drive motor 0.75kw
Rotating speed of rapid drive motor 910rpm
Overall dimensions*W*H) 2180*1496*2245mm
Weight(approx) 3000kg

 
MODEL:SLOTTING MACHINE B5032: B5020
PURPOSE:
  This machine is used for slotting the flat and formed surfaces. keyways. etc. It is suitable for either single- piece or small batch production.
CHARACTERISTICS:
  The main transmission mechanism is used for converting the rotating motion of the crank gear in to reciprocating motion of ram. The worktable is designed for longitudinal, cross and rotary feeding both automatically and manually. The feed is stopped automatically. when the worktable is in case of trouble.
   The electric equipment of this machine is suitable for 3-phases A. C. power supply of 50 cycles. 380V.
  Maims devices of voltages and or frequencies other than specified above can be supplied according to the special order of users.
Work range B5020 B5032
Max. slotting length 200 320
Max. dimensions of workpiece(L*H) 485*200 600*320
Max.weight of workpiece 400kg 500kg
Max.cutting force 550kg 750kg
No. of ram strokes per minute 32,50,80,125 21,32,50,80
Vertical ajustment of ram 230 315
Inclination of ram 0-8< 0-8<
Distance between tool bolding surface and column front 485mm 600mm
Max. tool shank size(W*H) 25*40mm 25*40mm
Table diameter 500mm 630mm
Distance between table surface. and low end of ram 320mm 490mm
Max. longitudinal travel of table 500mm 630mm
Max. cross travel of table 500mm 560mm
Range of table longitudinal and cross power feeds 0.08-1.21 0.08-1.21mm
Range of table rotary power feeds 0.052-0.783< 0.052-0.783<
Power of Main drive motor 3kw 4kw
Rotating speed of main drive motor 1430rpm 960rpm
Weight (approx. ) 2000kg 3000kg

 
MODEL: SLOTTING MACHINE B5020D
PURPOSE:
  This machine is used for slotting the flat and formed surface. keyways, etc. It is suitable for single-piece or small batch production.
CHARACTERISTICS:
  The main transmission mechanism is used for converting the rotating motion of the crank-gear into reciprocating motion of ram. The worktable is designed for longitudinal. cross and rotary feeding both automatically and manually or it can be shifted quickly the feed is stopped automatically. When the worktable is in case of trouble.
  The machine is equipped with a braking motor and is operated centrally.
  When slotting the workpiece according to the required division the indexing mechanism can be used for dividing the worktable rotation.
  The machine is lubricated by oil pump. The lubricant through the oil pipe reaches to every lubricating point. The adjustment of lubricating system is very convenient.
  The electric equipment is arranged in the bed, so as to make it safe and reliable for operating.
  Mains devices of voltages and or frequencies other than specified above can be supplied according to the special order of users.
Max. slotting length 200mm
Max. dimensions of workpiece(L*H) 485*200mm
Max. weight of workpiece 400kg
Max. cutting force 550kg
No. of ram strokes per minute 32,50,80,125 r.p.m
Vertical adjustment of ram 230mm
Inclination of ram 08<
Distance between tool holding surface and column front 485mm
Max.tool shank size(W*H) 25X40mm
Table diameter 500mm
Distance between table surface and low end of ram 320mm
Max. longitudinal travel of table 500mm
Range of table longitudinal and cp power feeds 0.081.21mm
Range of table rotary power feeds 0.0520.783<
Main drive motor 3kw:1430 r.p.m
Rapid drive motor 0.75kw:1280 r.p.m
Overall dimensions*W*H) 1836*1305*1995mm
Weight(approx.) 2000 kg

eChinaTool    Reserved